What you’ll learn
The module and location configuration of every storage device type CRIBWISE supports – drawer and module types, both dimensions, whether the module is controlled, and what a module represents.
Use it to check what a manufacturer supports before you create the storage device. The article for each device carries the same values with its own settings and prerequisites.
How to read the table
| Column | Meaning |
| Storage device manufacturer | The manufacturer selected on the storage device. |
| Module type | The drawer, column, tray or shelf type the row describes. |
| First dimension and Second dimension | The ranges the location structure uses in that module. |
| Is controlled | Whether the module itself is controlled by the machine. |
| Module is set per | What one module represents – a drawer, a column, a tray or a cabinet. |
Supported configurations
| Storage device manufacturer | Module type | First dimension | Second dimension | Is controlled | Module is set per |
|
Lista
|
LPC 6×9-54-75 | 1-1 | 1-54 | No | Drawer |
| LPC 6×8-48-75 | 1-1 | 1-48 | No | Drawer | |
| LPC 6×7-42-75 | 1-1 | 1-42 | No | Drawer | |
| LPC 6×6-36-75 | 1-1 | 1-36 | No | Drawer | |
| LPC 6×4-24-75 | 1-1 | 1-24 | No | Drawer | |
| LPC 6×3-18-75 | 1-1 | 1-18 | No | Drawer | |
| LPC 6×2-12-75 | 1-1 | 1-12 | No | Drawer | |
| LPC 4×9-36-75 | 1-1 | 1-36 | No | Drawer | |
| LPC 4×4-16-75 | 1-1 | 1-16 | No | Drawer | |
| LPC 2×9-18-75 | 1-1 | 1-18 | No | Drawer | |
| LPC 2×4-8-75 | 1-1 | 1-8 | No | Drawer | |
| LPC 1×6-6-75 | 1-1 | 1-6 | No | Drawer | |
| LPC 6×6-36-100 | 1-1 | 1-36 | No | Drawer | |
| LPC 6×4-24-100 | 1-1 | 1-24 | No | Drawer | |
| LPC 6×3-18-100 | 1-1 | 1-18 | No | Drawer | |
| LPC 6×2-12-100 | 1-1 | 1-12 | No | Drawer | |
| LPC 4×4-16-100 | 1-1 | 1-16 | No | Drawer | |
| LPC 2×4-8-100 | 1-1 | 1-8 | No | Drawer | |
| LPC 1×4-4-100 | 1-1 | 1-4 | No | Drawer | |
| LPC 4×4-16-150 | 1-1 | 1-16 | No | Drawer | |
| LPC 2×4-8-150 | 1-1 | 1-8 | No | Drawer | |
| LPC 2×2-4-150 | 1-1 | 1-4 | No | Drawer | |
| LPC 1×4-4-150 | 1-1 | 1-4 | No | Drawer | |
| LDC (Drawer control) | Custom | Custom | Yes | Drawer | |
| Signifi | Toolbox | – | – | Yes | Drawer |
|
Sielaff
|
WA2020 (coil) | 1-7 according number of horizontal coil lines | 1-9 according number of coils in the line | No | Cabinet (no module address needed) |
| SU2020 (coil) | 1-7 according number of horizontal coil lines | 1-9 according number of coils in the line | No | Cabinet (no module address needed) | |
| ASK200 (coil) | 1-1 | 1-86 | No | Shelf | |
| TB300 (coil) | 1-1 | 1-86 | No | Shelf | |
| MPH | Spiral box | 1-8 according number of horizontal coil lines (two coil lines in one level facing each other) | 1-8 according number of coils in the line | No | Cabinet (no module address needed) |
| VGS | FMB-L-05 | 1-1 | 1-99 according number of drawers | No | Cabinet. Address set to SVxx, where xx is number specified by manufacturer (written on locations) |
|
AutoCrib
|
RoboCrib TX750 | – | 1-59 according setup from SFI | No | Column |
| VX500 | Level (1-15) | 1 1-2 1-3 1-4 1-6 1-12 |
No | Column | |
| VX1000 | Level (1-15) | 1 1-2 1-3 1-4 1-6 1-12 |
No | Column | |
| LX2000 | Level (1-15) | 1 1-2 1-3 1-4 1-6 1-12 |
No | Column | |
| Locker FX | – | 1 as default | Yes | Address (1-126) | |
|
Kardex
|
Shuttle XP | – | – | No | Tray |
| Megamat RS | – | – | No | Tray | |
|
Modula
|
Lift | – | – | No | Tray |
| Slim | – | – | No | Tray | |
| Weland | Compact | – | – | No | Tray |
| Hänel | Lean-Lift | – | – | No | Tray |
| Multi-Space | – | – | No | Tray | |
| N/A | Open Storage (custom ranges) | N/A | N/A | N/A | N/A |
Common confusion
| People often think… | But actually… |
| Any drawer type can be used with any manufacturer. | The supported module types are fixed per manufacturer – see the rows above. |
| The dimensions can be chosen freely. | They follow the module type. Only a few types, such as Lista LDC, allow custom dimensions. |
| Controlled means the location is lit up. | Is controlled says whether the module is controlled by the machine, which decides whether CRIBWISE can open or address it. |
Take action
Found your device? Open its own article for the settings and prerequisites, then create the storage device with How to configure storage devices.
Related articles
- How to configure storage devices – create and configure a storage device in the Admin Portal.
- How to create and manage devices – the device a storage device belongs to.
- How to find Device ID and Storage Device ID – identify a device when configuring it.
- CRIBWISE Hardware Configuration Possibilities – which hardware combinations are offered.